Lighthouse Marine Gig Harbor, LLC

Check transom drain plug
Treat fuel with stabilizer
Test run
Check compression
Check for proper operating temperature
Test run and take download and note issues
Check charging, spark and cooling
Check and replace spark plugs
Spray Decarbonizer through engine
Check carb sync

Check idle speed and adjust if needed
Check fuel system for proper operation
Clean/replace fuel filters as needed
Replace Hi-pressure inline fuel filter (HPDI)
Replace water separator fuel filter
Change engine oil and filter
Check and fill engine oil reservoir
Fog internal engine parts
Run Salt-Away through engine
Check and change gear lube and washers
Check for water in lube
Pressure and vacuum test if water found
Check speedometer pick-up
Remove and check prop
Check for fish line around prop and lower unit
Grease prop shaft and install prop with new pin
Check water pump output and condition
Check compressor oil
Check steering and control cables
Check total steering system and ease of operation
Check hydraulic  steering system
Grease engine and steering cable
Check trim and tilt and reservoir and fill as needed
Check trim and tilt
Check all safety functions
Check reverse lock
Check shift
Spray power head with Corrosion Block

Check transom drain plug
Treat fuel with stabilizer
Test run
Check compression
Check for proper operating temperature
Test run and take download and note issued
Check charging, spark and cooling
Check spark output
Check and replace spark plugs
Spray Decarbonizer through engine
Check carb synchronization
Check idle speed and adjust if needed
Check fuel system for proper operation
Clean/replace fuel filters as needed
Replace hi-pressure inline fuel filter (HPDI)
Replace water separator fuel filter
Change engine oil and filter

Check and fill engine oil reservoir
Grease all fittings
Fog internal engine parts
Run Salt-Away through engine
Check and change gear lube and washers
Check for water in lube, pressure and vacuum test if water is found
Check speedometer pick-up
Remove and check prop, check for fish line, grease shaft and replace prop with new pin
Check water pump output and condition
Check total steering system ease of operation
Check hydraulic steering system
Grease engine and steering cable
Check trim and tilt and reservoir and fill as needed
Check all safety features
Check shift
Spray power head with Corrosion Block
Check/replace anodes as needed
Check battery connections, replace wing nuts with lock nuts
Check tire pressure PSI
Grease bearing buddies, lube winch, coupler and tongue jack 

For an Outboard Winterizing we perform the following:

Check transom drain plugs
Test run
Check for proper operating temperature
Warm up engine
Check and fill engine reservoir
Run Salt-Away through engine
Checked water pump output and condition
Checked total steering system ease of operation
Check trim and tilt
Spray power head with Corrosion Block
Check gauges
Check, test and serviced battery
Check battery fluid and fill if needed

Charge battery if needed
Check battery connections
Replace battery wing nuts with locknuts
Check brake operation
Check brake fluid
Check spare tire PSI
Check tire pressure PSI
Grease bearing buddies
Lube winch, coupler and tongue jack.